We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
M10 x 130mm High Tensile Anchor Allthread Studs with Setting Tool - Box of 10
In stock
SKU: JSTUD10130HT
| Thread Diameter | M10 (10mm) |
| Thread Length | 130mm |
| Min Drill Hole Depth | 90mm |
| Material | Zinc Plated |
| Setting Tool Supplied | 1 |
| Box Quantity | 10 |
- Grade 8.8 zinc plated and yellow passivated
- For use with glass spin in capsules or injection resin system
- Supplied complete with nut and washer
- The studs have external hexagon drive units with one drill bit drive unit in each box of 10
- Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules
- For load data see the appropriate chemical product
£12.95
£10.79
Performance Data
The below data is only relevant to the studs, it is not an indication of achievable fixing load, this will be determined by the type of resin, concrete strength or any other base material or anchors they are used with
Delivery Information
